Analysis in vitro of the influence of two mechanical bivalve models of heart valves by a wind tunnel model

Translated title of the contribution: Analysis in vitro of the influence of two mechanical bivalve models of heart valves by a wind tunnel model

O. John Bustamante, Ana I. Crispin, Nelson Escobar, Mauricio Giraldo

Research output: Contribution to journalArticle in an indexed scientific journalpeer-review

1 Scopus citations

Abstract

Introduction: prosthetic heart valves are evaluated using different techniques that involve in vitro studies and computational methods in addition to conventional clinical studies. Functional data to evaluate reflect the need for highly sensitive methods to determine its operating conditions that may emulate specific hemodynamic situations. With this objective, we designed an alternative method for better understanding the functionality of these models, analyzing in vitro fluid dynamic behavior of two models of mechanical heart valves using a wind tunnel. METHODS: we designed and developed a wind tunnel providing instrumental conditions that permit the evaluation of mechanical valves in different fluid dynamic conditions: subsonic tunnel of circular section (standard ANSI/AMCA_210-99 and ANSI/ASHRAE_51-99). Using the method of dynamic similarity, the experiment was characterized using typical values of flow rates and blood properties in a healthy adult. Results And Discussion: we evaluated two SJM® valve models, one with flat leaflet, and a variant of convex valves with air flows equivalent to blood flow rates of 1.5, 6.0 and 9.3 L/min. The convex valve prosthesis has a flow divided in three equivalent fields, in contrast to the flat valves that have a smaller central flow and two predominant laterals. The drag phenomenon produced by the two external currents wit regard to the central generates a higher RNS for the SJM® valve than the generated for the variant of convex valves. The velocity field adjacent to the convex side is less affected by turbulence than in the case of the flat leaflet, but on the contrary, the adjacent field to the concave side is more affected by local fluid dynamic effects: changes in direction, area reduction and increased velocity. Conclusions: the implemented method uses fluid dynamic characteristics of air in a wind tunnel, for in vitro evaluation of the influence on the flow field and shear forces of different models of mechanical heart valves, obtaining higher sensitivity than other alternatives available. The system was used to evaluate two types of prosthesis, showing that the curve leaflets tend to have less disruption of the flow than the flat valves. The implementation of the system presented as a new test bench allows to draw conclusions that serve as the basis for the design of the prosthesis, looking to offer less hemodynamic disturbance.

Translated title of the contributionAnalysis in vitro of the influence of two mechanical bivalve models of heart valves by a wind tunnel model
Original languageEnglish
Pages (from-to)89-99
Number of pages11
JournalRevista Colombiana de Cardiologia
Volume18
Issue number2
DOIs
StatePublished - 2011

Keywords

  • Fluid dynamics
  • Hemodynamics
  • Prosthetic heart valves
  • Test bench
  • Wind tunnel

Fingerprint

Dive into the research topics of 'Analysis in vitro of the influence of two mechanical bivalve models of heart valves by a wind tunnel model'. Together they form a unique fingerprint.

Cite this