Morphological analysis of carbon steels using fractal geometry

D. A. Prada; C. P. González; P. E. Vera; M. A. Álvarez

doi:10.1088/1742-6596/687/1/012075

Morphological analysis of carbon steels using fractal geometry

D. A. Prada
, C. P. González
, P. E. Vera
, M. A. Álvarez

Research output: Contribution to scientific journal › Conference and proceedings › peer-review

Abstract

In this paper we present the preliminary results of morphological analysis of Fe₅₉Mn_36.5Al_3.10C_3.56Cu_0.237%Wt alloy. This alloy was prepared by mechanical alloying with various milling times, then hot compacted at various pressures and finally underwent presented a sintering process. The samples were characterized structurally by experimental techniques such as: X-ray diffraction and scanning electron microscopy. Each micrograph was analysed by fractal dimension using the Box Counting method in 2D; this type of tool allows you to assign a numerical value to the region which has been applied the technic. This numerical value is associated with the properties obtained by experimental techniques such as microhardness.

Original language	English
Article number	012075
Journal	Journal of Physics: Conference Series
Volume	687
Issue number	1
DOIs	https://doi.org/10.1088/1742-6596/687/1/012075
State	Published - 12 Feb 2016
Event	3rd International Meeting for Researchers in Materials and Plasma Technology, IMRMPT 2015 and 1st Symposium on Nanoscience and Nanotechnology - Bucaramanga, Colombia Duration: 4 May 2015 → 9 May 2015

Access to Document

10.1088/1742-6596/687/1/012075

Cite this

@article{8a2e194216aa4c4298388f10df71d848,

title = "Morphological analysis of carbon steels using fractal geometry",

abstract = "In this paper we present the preliminary results of morphological analysis of Fe59Mn36.5Al3.10C3.56Cu0.237\%Wt alloy. This alloy was prepared by mechanical alloying with various milling times, then hot compacted at various pressures and finally underwent presented a sintering process. The samples were characterized structurally by experimental techniques such as: X-ray diffraction and scanning electron microscopy. Each micrograph was analysed by fractal dimension using the Box Counting method in 2D; this type of tool allows you to assign a numerical value to the region which has been applied the technic. This numerical value is associated with the properties obtained by experimental techniques such as microhardness.",

author = "Prada, \{D. A.\} and Gonz{\'a}lez, \{C. P.\} and Vera, \{P. E.\} and {\'A}lvarez, \{M. A.\}",

year = "2016",

month = feb,

day = "12",

doi = "10.1088/1742-6596/687/1/012075",

language = "Ingl{\'e}s",

volume = "687",

journal = "Journal of Physics: Conference Series",

issn = "1742-6588",

publisher = "IOP Publishing Ltd.",

number = "1",

note = "3rd International Meeting for Researchers in Materials and Plasma Technology, IMRMPT 2015 and 1st Symposium on Nanoscience and Nanotechnology ; Conference date: 04-05-2015 Through 09-05-2015",

}

TY - JOUR

T1 - Morphological analysis of carbon steels using fractal geometry

AU - Prada, D. A.

AU - González, C. P.

AU - Vera, P. E.

AU - Álvarez, M. A.

PY - 2016/2/12

Y1 - 2016/2/12

N2 - In this paper we present the preliminary results of morphological analysis of Fe59Mn36.5Al3.10C3.56Cu0.237%Wt alloy. This alloy was prepared by mechanical alloying with various milling times, then hot compacted at various pressures and finally underwent presented a sintering process. The samples were characterized structurally by experimental techniques such as: X-ray diffraction and scanning electron microscopy. Each micrograph was analysed by fractal dimension using the Box Counting method in 2D; this type of tool allows you to assign a numerical value to the region which has been applied the technic. This numerical value is associated with the properties obtained by experimental techniques such as microhardness.

AB - In this paper we present the preliminary results of morphological analysis of Fe59Mn36.5Al3.10C3.56Cu0.237%Wt alloy. This alloy was prepared by mechanical alloying with various milling times, then hot compacted at various pressures and finally underwent presented a sintering process. The samples were characterized structurally by experimental techniques such as: X-ray diffraction and scanning electron microscopy. Each micrograph was analysed by fractal dimension using the Box Counting method in 2D; this type of tool allows you to assign a numerical value to the region which has been applied the technic. This numerical value is associated with the properties obtained by experimental techniques such as microhardness.

UR - https://www.scopus.com/pages/publications/84961772436

U2 - 10.1088/1742-6596/687/1/012075

DO - 10.1088/1742-6596/687/1/012075

M3 - Ponencia publicada en las memorias del evento con ISSN

AN - SCOPUS:84961772436

SN - 1742-6588

VL - 687

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

IS - 1

M1 - 012075

T2 - 3rd International Meeting for Researchers in Materials and Plasma Technology, IMRMPT 2015 and 1st Symposium on Nanoscience and Nanotechnology

Y2 - 4 May 2015 through 9 May 2015

ER -

Morphological analysis of carbon steels using fractal geometry

Abstract

Access to Document

Fingerprint

Cite this