Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA)

Daniel Peláez; Adriana Restrepo-Osorio; Emigdio Mendoza; Cesar Isaza; Patricia Fernandez-Morales

doi:10.1557/opl.2015.417

Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA)

Daniel Peláez, Adriana Restrepo-Osorio, Emigdio Mendoza, Cesar Isaza, Patricia Fernandez-Morales

Producción científica: Capítulo del libro/informe/acta de congreso › Ponencia publicada en las memorias del evento con ISBN › revisión exhaustiva

Resumen

In the present work was used Dynamical Mechanical Analysis (DMA) to study the magnesium alloy Mg AZ3 1-B, in plate form with a thickness of 2.5 mm. The plates were processed using Equal Channel Angular Sheet Drawing (ECASD), which is a severe plastic deformation technique, which allows imposing strain without dimensional changes to a metal plate, at room temperature with an angle of 135°. The obtained results show dependence between the storage modulus (M'), temperature and frequency used on the tests. The greater M' values were obtained at the lower temperatures and at the higher frequency used. However, at lower frequencies M' response is not affected by the used frequencies. At the higher temperatures there is an M' reduction, which promotes the material deformation.

Idioma original	Inglés
Título de la publicación alojada	Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014
Editores	Ramiro Perez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Munoz
Editorial	Materials Research Society
Páginas	109-114
Número de páginas	6
ISBN (versión digital)	9781605117430
DOI	https://doi.org/10.1557/opl.2015.417
Estado	Publicada - 2015
Evento	23rd International Materials Research Congress, IMRC 2014 - Cancun, México Duración: 17 ago. 2014 → 21 ago. 2014

Serie de la publicación

Nombre	Materials Research Society Symposium Proceedings
Volumen	1766
ISSN (versión impresa)	0272-9172

Conferencia

Conferencia	23rd International Materials Research Congress, IMRC 2014
País/Territorio	México
Ciudad	Cancun
Período	17/08/14 → 21/08/14

Nota bibliográfica

Publisher Copyright:
© 2015 Materials Research Society.

Acceder al documento

10.1557/opl.2015.417

Citar esto

Peláez, D., Restrepo-Osorio, A., Mendoza, E., Isaza, C., & Fernandez-Morales, P. (2015). Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA). En R. P. Campos, A. C. Cuevas, & R. A. E. Munoz (Eds.), Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014 (pp. 109-114). (Materials Research Society Symposium Proceedings; Vol. 1766). Materials Research Society. https://doi.org/10.1557/opl.2015.417

Peláez, Daniel ; Restrepo-Osorio, Adriana ; Mendoza, Emigdio et al. / Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA). Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014. editor / Ramiro Perez Campos ; Antonio Contreras Cuevas ; Rodrigo A. Esparza Munoz. Materials Research Society, 2015. pp. 109-114 (Materials Research Society Symposium Proceedings).

@inproceedings{3b15609bfb5840b593a9f7156fef61b9,

title = "Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA)",

abstract = "In the present work was used Dynamical Mechanical Analysis (DMA) to study the magnesium alloy Mg AZ3 1-B, in plate form with a thickness of 2.5 mm. The plates were processed using Equal Channel Angular Sheet Drawing (ECASD), which is a severe plastic deformation technique, which allows imposing strain without dimensional changes to a metal plate, at room temperature with an angle of 135°. The obtained results show dependence between the storage modulus (M'), temperature and frequency used on the tests. The greater M' values were obtained at the lower temperatures and at the higher frequency used. However, at lower frequencies M' response is not affected by the used frequencies. At the higher temperatures there is an M' reduction, which promotes the material deformation.",

keywords = "Absorption, Alloy, Mg, Phase transformation, Steel",

author = "Daniel Pel{\'a}ez and Adriana Restrepo-Osorio and Emigdio Mendoza and Cesar Isaza and Patricia Fernandez-Morales",

note = "Publisher Copyright: {\textcopyright} 2015 Materials Research Society.; 23rd International Materials Research Congress, IMRC 2014 ; Conference date: 17-08-2014 Through 21-08-2014",

year = "2015",

doi = "10.1557/opl.2015.417",

language = "Ingl{\'e}s",

series = "Materials Research Society Symposium Proceedings",

publisher = "Materials Research Society",

pages = "109--114",

editor = "Campos, {Ramiro Perez} and Cuevas, {Antonio Contreras} and Munoz, {Rodrigo A. Esparza}",

booktitle = "Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014",

}

Peláez, D, Restrepo-Osorio, A, Mendoza, E, Isaza, C & Fernandez-Morales, P 2015, Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA). En RP Campos, AC Cuevas & RAE Munoz (eds.), Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014. Materials Research Society Symposium Proceedings, vol. 1766, Materials Research Society, pp. 109-114, 23rd International Materials Research Congress, IMRC 2014, Cancun, México, 17/08/14. https://doi.org/10.1557/opl.2015.417

Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA). / Peláez, Daniel; Restrepo-Osorio, Adriana; Mendoza, Emigdio et al.
Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014. ed. / Ramiro Perez Campos; Antonio Contreras Cuevas; Rodrigo A. Esparza Munoz. Materials Research Society, 2015. p. 109-114 (Materials Research Society Symposium Proceedings; Vol. 1766).

Producción científica: Capítulo del libro/informe/acta de congreso › Ponencia publicada en las memorias del evento con ISBN › revisión exhaustiva

TY - GEN

T1 - Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA)

AU - Peláez, Daniel

AU - Restrepo-Osorio, Adriana

AU - Mendoza, Emigdio

AU - Isaza, Cesar

AU - Fernandez-Morales, Patricia

PY - 2015

Y1 - 2015

N2 - In the present work was used Dynamical Mechanical Analysis (DMA) to study the magnesium alloy Mg AZ3 1-B, in plate form with a thickness of 2.5 mm. The plates were processed using Equal Channel Angular Sheet Drawing (ECASD), which is a severe plastic deformation technique, which allows imposing strain without dimensional changes to a metal plate, at room temperature with an angle of 135°. The obtained results show dependence between the storage modulus (M'), temperature and frequency used on the tests. The greater M' values were obtained at the lower temperatures and at the higher frequency used. However, at lower frequencies M' response is not affected by the used frequencies. At the higher temperatures there is an M' reduction, which promotes the material deformation.

AB - In the present work was used Dynamical Mechanical Analysis (DMA) to study the magnesium alloy Mg AZ3 1-B, in plate form with a thickness of 2.5 mm. The plates were processed using Equal Channel Angular Sheet Drawing (ECASD), which is a severe plastic deformation technique, which allows imposing strain without dimensional changes to a metal plate, at room temperature with an angle of 135°. The obtained results show dependence between the storage modulus (M'), temperature and frequency used on the tests. The greater M' values were obtained at the lower temperatures and at the higher frequency used. However, at lower frequencies M' response is not affected by the used frequencies. At the higher temperatures there is an M' reduction, which promotes the material deformation.

KW - Absorption

KW - Alloy

KW - Mg

KW - Phase transformation

KW - Steel

UR - http://www.scopus.com/inward/record.url?scp=84944710473&partnerID=8YFLogxK

U2 - 10.1557/opl.2015.417

DO - 10.1557/opl.2015.417

M3 - Ponencia publicada en las memorias del evento con ISBN

AN - SCOPUS:84944710473

T3 - Materials Research Society Symposium Proceedings

SP - 109

EP - 114

BT - Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014

A2 - Campos, Ramiro Perez

A2 - Cuevas, Antonio Contreras

A2 - Munoz, Rodrigo A. Esparza

PB - Materials Research Society

T2 - 23rd International Materials Research Congress, IMRC 2014

Y2 - 17 August 2014 through 21 August 2014

ER -

Peláez D, Restrepo-Osorio A, Mendoza E, Isaza C, Fernandez-Morales P. Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA). En Campos RP, Cuevas AC, Munoz RAE, editores, Structural and Chemical Characterization of Metals, Alloys, and Compounds - 2014. Materials Research Society. 2015. p. 109-114. (Materials Research Society Symposium Proceedings). doi: 10.1557/opl.2015.417

Characterization of Mg AZ31 Alloy ECASD processed using dynamical mechanical analysis (DMA)

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Acceder al documento

Huella

Citar esto