TY - JOUR
T1 - Numerical Simulation of the Heat Transfer Inside a Shell and Tube Heat Exchanger Considering Different Variations in the Geometric Parameters of the Design
AU - Estupiñán-Campos, José
AU - Quitiaquez, William
AU - Nieto-Londoño, César
AU - Quitiaquez, Patricio
N1 - Publisher Copyright:
© 2024 by the authors.
PY - 2024/2
Y1 - 2024/2
N2 - The present study aims to analyze the heat transfer variations in different models of shell and tube heat exchangers considering geometric variations in the baffle angles and in the tube’s profiles. Each baffle configuration and geometric variation in the profiles were tested under different mass flow rates (0.25, 0.5, 0.75, and 1 kg·s−1) in the shell to study the heat transfer improvement. The models were simulated using a CFD simulation software ANSYS Fluent including an experimental geometry which was used to validate the simulation process. The experiment results are in good agreement with the CFD results. The analysis of the results shows that an angle of 60° in the baffles generated the highest heat flow (more than 40 kW) with an inclination to the cold flow inlet and a mixed distribution considering a mass flow rate of 1 kg·s−1 in the shell. In addition, the horizontal elliptic profile achieved a heat flow higher than 29 kW with a mass flow rate of 0.5 kg·s−1 in the shell.
AB - The present study aims to analyze the heat transfer variations in different models of shell and tube heat exchangers considering geometric variations in the baffle angles and in the tube’s profiles. Each baffle configuration and geometric variation in the profiles were tested under different mass flow rates (0.25, 0.5, 0.75, and 1 kg·s−1) in the shell to study the heat transfer improvement. The models were simulated using a CFD simulation software ANSYS Fluent including an experimental geometry which was used to validate the simulation process. The experiment results are in good agreement with the CFD results. The analysis of the results shows that an angle of 60° in the baffles generated the highest heat flow (more than 40 kW) with an inclination to the cold flow inlet and a mixed distribution considering a mass flow rate of 1 kg·s−1 in the shell. In addition, the horizontal elliptic profile achieved a heat flow higher than 29 kW with a mass flow rate of 0.5 kg·s−1 in the shell.
KW - baffle
KW - CFD
KW - heat transfer
KW - profiles
KW - shell and tube heat exchangers
UR - http://www.scopus.com/inward/record.url?scp=85184481979&partnerID=8YFLogxK
UR - https://www.mendeley.com/catalogue/fe52e95a-21a7-3e97-b5ed-feed160dca9c/
U2 - 10.3390/en17030691
DO - 10.3390/en17030691
M3 - Artículo en revista científica indexada
AN - SCOPUS:85184481979
SN - 1996-1073
VL - 17
JO - Energies
JF - Energies
IS - 3
M1 - 691
ER -
