Off-axis flexure test: A new method for obtaining in-plane shear properties

F. Mujika, A. Valea, P. Gañán, I. Mondragon

Resultado de la investigación: Contribución a una revistaArtículorevisión exhaustiva

12 Citas (Scopus)

Resumen

Off-axis three-point flexure test for unidirectional composites is proposed as a new method for obtaining in-plane shear modulus and in-plane shear strength. The method of determination of the in-plane shear modulus G LT has been explained in a previous work where the displacement field of an off-axis flexure test was analyzed. In the present work, besides summarizing the calculation equations of GLT, the condition of small displacements is analyzed. Otherwise, an error analysis is carried out in order to study the influence of the calculated value of GLT on the other elastic parameters. Normal and shear stresses in the fiber-matrix interface change from point to point in the specimen depending on the fiber orientation angle and specimen geometry. A critical point of failure that depends on the fiber orientation angle is determined and optimum conditions for obtaining in-plane shear strength are discussed. Experiments for different fiber orientations and geometric conditions have been carried out for IM7/8552 epoxy matrix based carbon fiber reinforced unidirectional composite material.

Idioma originalInglés
Páginas (desde-hasta)953-980
Número de páginas28
PublicaciónJournal of Composite Materials
Volumen39
N.º11
DOI
EstadoPublicada - 2005
Publicado de forma externa

Huella

Profundice en los temas de investigación de 'Off-axis flexure test: A new method for obtaining in-plane shear properties'. En conjunto forman una huella única.

Citar esto